Engine | Spark Plug Wire Sets
Autotech's 10.4mm High Performance Ignition Wires for your VW
 |
 |
1.8L 16V Spark Plug Wire Set |
|
Autotech's whopping 10.4mm Shock Therapy spark plug wire sets are the perfect solution when searching for
high-performance ignition wires. Equally suited for competition or OE replacement, Shock Therapy spark
plug wires are carefully designed, constructed and tested to fit perfectly and extract max horsepower and
torque from your Volkswagen's ignition system. Shock Therapy spark plug wire sets are over 2mm larger
in diameter than what the competition can muster up, easily providing the most "bang for your buck" in both
performance and price!
How do we build the finest spark plug wire sets for your Volkswagen? A tightly woven polyester braid
is applied over the first layer of EPDM followed by two more layers of pure silicone to eliminate unwanted
radio interference and loose, bulky sleeving. Shock Therapy spark plug wire sets provide 102,000 volts
of dielectric strength and are able to resist temperatures up to 600°F. We specify that only
stranded pure copper be used for the highest conductivity possible rather than cheaper and less effective
steel so common with other inferior wires. Shock Therapy spark plug wires sets use only OEM connectors
and termination techniques for factory quality and reliability. Shock Therapy spark plug wire sets are
available in "Nuclear Red" for most water-cooled Volkswagens. Every Shock Therapy spark plug wire set
is backed by a limited lifetime warranty from Autotech.
- HUGE 10.4mm in diameter
- "Nuclear Red" for searing good looks
- Maximum firepower to your plugs for maximum horsepower and torque
- 3 layers: EPDM inner followed by 2 more layers of pure silicon
- Tightly woven polyester inner braid
- Stranded pure copper conductor
- 102,000 volts of dielectric strength
- 600°F of heat protection
- OEM connectors and termination techniques for factory quality
Description |
Part Number |
Price |
Order Online |
Rabbit/Scirocco/Jetta 1 8V to 7/84 production |
10.998.200K |
$99.95 |
Add to Basket |
Golf 2/Jetta 2/Scirocco/Cabriolet 8V 8/84-92 |
10.998.210K |
99.95 |
Add to Basket |
Corrado G60 |
10.998.210K |
99.95 |
Add to Basket |
Golf 2/Jetta 2/Scirocco 1.8L 16V 1986-89 |
10.998.220K |
169.95 |
Add to Basket |
Golf 2/Jetta 2/Passat 2.0L 16V 1990-93 |
10.998.221K |
169.95 |
Add to Basket |
VR6 Corrado/Passat/Golf 3/Jetta 3 to 4/93 (cars w/ distributor) |
10.998.230K |
159.95 |
Add to Basket |
VR6 Corrado/Passat/Golf 3/Jetta 3 4/93-99 (distributorless) |
10.998.232K |
149.95 |
Add to Basket |
Golf 3/Jetta 3 2.0L 8V (ABA engine) 1993-99 |
10.998.240K |
99.95 |
Add to Basket |
Spark Plug Boot Puller & Installer
The VW steel spark plug boots are designed to seal and increase contact between the spark plug and spark
plug wire. With the increased seal and location of the boot, a special tool has been developed to
access and remove the spark plug boot. The tool is also needed in snapping the spark plug boot on to
the spark plug that is in a very confined area. This spark plug boot tool was designed in hardened
stainless steel for long-term service. The "T" handle gives you plenty of pulling power to remove and
replace the most difficult spark plug boot. Manufactured by Schley Products in the USA.
Tool |
Part Number |
Price |
Order Online |
Spark Plug Boot Puller & Installer |
10.012.98180 |
$44.95 |
Add to Basket |
|
